MTM Hydro Ball Valve DN10 | 3/8" Female | Brass | With Quick Connects | The Clean garage

This product is offered with the most common configuration of MTM Stainless Quick Connects installed, we also offer it bare with no quick connects:

We include a 3/8" plug on the inlet to attach to a coupler on your hose and a 3/8" Coupler on the outlet to connect to the plug on your spray gun.

Commonly referred to as "DN10" or as MTM Hydro's High-Pressure Plated Brass Ball valve, is found in a variety of areas in the pressure washing system and available at The Clean Garage.

Most commonly, this round-edged, lightweight, heavy-duty Italian ball valve is found at the base of the spray gun and used as a temporary shutoff while the pressure washer is on.

By shutting the water off, the user can then change over to another gun set up without turning the entire system off.

This specific series of Italian Ball Valve is a top 5 product of ours every month of the year which goes to show you that tens of thousands of people per year cannot be wrong about their choice of quality!

The inlet and outlet of this valve are both FEMALE 3/8" thread. To add quick connects you can use a MALE 3/8" Plug or Coupler on both sides. 

• 3/8"F BSP Inlet x 3/8"F BSP Outlet
• Max - 176°F
• Max - 3,000 PSI
• Hole Size - 8mm

Warranty Information and Technical Support Contact:

It is important you understand before purchasing an MTM Hydro brand product, the warranty is facilitated by Veloci Performance Products (the supplier/manufacturer of MTM Hydro brand products), which is the case with almost all tool and equipment purchases. Veloci warrants to the original purchaser of their pressure washing accessories that such products will be free of material and workmanship defects under normal use for the period of 90 days from purchase. The entire warranty policy can be view at the link below. In the very rare case of a warranty defect or failure with a high pressure part it will typically present itself with the first use. After the 90 day period any failure of a high pressure part is considered regular wear and tear.

Any technical issues, warranty returns or exchanges will be facilitated directly with the supplier/manufacturer, Veloci Performance Products. The Clean Garage will assist you in making contact with them and anything else within our power to make the process smooth for you should an issue arise. We suggest reviewing the manufacturers full warranty policy before purchase which can be found here: https://www.vppdealers.com/refunds

For general or customer support service related inquiries, call MTM at 866-686-4020