MTM Hydro Ball Valve | 3/8" Female | Brass | 3000 PSI

Commonly referred to as "DN10" or as MTM Hydro's High-Pressure Plated Brass Ball valve, is found in a variety of areas in the pressure washing system and available at The Clean Garage.

Most commonly, this round-edged, lightweight, heavy-duty Italian ball valve is found at the base of the spray gun and used as a temporary shutoff while the pressure washer is on.

By shutting the water off, the user can then change over to another gun set up without turning the entire system off.

This specific series of Italian Ball Valve is a top 5 product of ours every month of the year which goes to show you that tens of thousands of people per year cannot be wrong about their choice of quality!

The inlet and outlet of this valve are both FEMALE 3/8" thread. To add quick connects you can use a MALE 3/8" Plug or Coupler on both sides. 

Most commonly you would a plug on the inlet to attach to a coupler on your hose and a coupler on the outlet to installed to the plug on your spray gun.

• 3/8"F BSP Inlet x 3/8"F BSP Outlet
• Max - 176°F
• Max - 3,000 PSI
• Hole Size - 8mm