Rupes Paint Correction Starter Kit | LHR15 Mark III & LHR75E Polishers

The ultimate paint correction starter kit, built by the staff at The Clean Garage with 2 of our favorite polishers, 10 pads and 3 compounds to get you started right!

Ships Free

Kit Includes:

• (1) LHR15III Polisher
• (1) 5" backing plate
• (1) 250ml DA Coarse Compound
• (1) 250ml DA Fine Compound
• (1) 250ml UNO Pure Finishing Polish
• (1) 5" DA Coarse Blue Foam Pad
• (1) 5" DA Fine Yellow Foam Pad
• (1) 5" DA Ultra Fine White Foam Pad
• (1) 5"Coarse Blue Wool Pad
• (1) 5" Medium Yellow Wool Pad
• (1) RUPES LHR75E Mini Random Orbital Polisher
• (1) 3" backing plate
• (1) 3" DA Coarse Blue Foam Pad
• (1) 3" DA Fine Yellow Foam Pad
• (1) 3" DA Ultra Fine White Foam Pad
• (1) 3"Coarse Blue Wool Pad
• (1) 3" Medium Yellow Wool Pad

Built to handle almost any detailing situation, the LHR 15 Mark III is the ultimate choice for detailing professionals who seek a balance of power and maneuverability. The ergonomic design allows for precise paint correction with complete comfort, including curved surfaces. The powerful motor delivers peak performance in the optimal OPM range and ideal performance through the entire speed range with the addition of a progressive trigger and retuned speed control.

Designed as the true “Detailers BigFoot” the LHR15 Mark III polisher balances performance, maneuverability, capability, and the signature ergonomic performance of the RUPES BigFoot family of random orbital polishers. While the orbit of 15mm is smaller than the flagship LHR21 tool by 6mm the LHR15 Mark III compensates with a higher top speed and coupled with the 125mm/5″ backing plate allows the tool to take on more complex or intricate curves and contours found in today’s modern car designs.

Improving upon the previous generation LHR15, the LHR15 Mark III adds ergonomic rubber grips for improved operator feel, progressive trigger, a more refined chassis with even better balance, dual tool support rests to keep the polisher upright when on a cart or table, a retuned electronics module for improved performance, and a 30ft cord standard. The MarkIII continues to boast the most efficient design in the category only consuming a max of 500watts of input which means the LHR15 Mark III delivers incredible amounts of torque and power to the surface without any additional vibration, tool generated heat, or other side effects that lead to operator fatigue common with lower quality tools.

If you’re looking for the best all around random orbital polisher for detailing purposes look no further than the LHR15 Mark III.

IMPROVED ERGONOMICS - The rubberized front grip of the MarkIII offers exceptional comfort for the operator while providing a non-slip surface for control. The improved rear handle also integrates rubberized surfaces for improved feel. Two strategically placed, non-marking, tool rests provide stability when the tool is not in use as well as additional protection against unintended impact. The continued refinement of the BigFoot random orbital platform in MarkIII reinforces its best in class reputation, making the best even better.

TUNED ELECTRONIC SPEED MODULE – The new electronic speed control dial allows for easy adjustment of the top speed of the polisher without requiring the operator to move his hands. The larger dial is easily adjusted with a move of the thumb. High visibility numbers and a more positive feedback from the movement of the dial make speed changes feel more deliberate, allowing operators to select the ideal speed for the task without any interruption to the polishing process. The module has also been tuned to deliver peak torque and speed in the optimal dial ranges.

PROGRESSIVE TRIGGER – Adding an additional layer of control is the new progressive trigger. Acting as a throttle to control speeds within the dial range, the progressive trigger allows the operator to make subtle adjustments for precise control without interruption of the process or need to reposition the grip to access the speed dial. The linear delivery of power allows for very fine adjustment within each speed range giving technicians a whole new dimension of control.

LONGER CORDS – The Mark III comes standard with a 9 meter (29.6 ft) cord on both the LHR15 and LHR21 models. The longer cord provides users enough length to move more effortlessly around their workshop or studio without the need for additional extension cords or searching for a nearby outlet.

More about the LHR75E:

Ergonomically Perfect
With its non-slip rubber inserts on the front cover, the LHR 75E is perfect for all polishing operations in difficult to reach areas. The operator can work in perfect comfort to produce the best possible results.

Switch Lock
Lined in non-slip rubber, the on/off switch of the Rupes LHR 75E ensures a controlled soft start, giving the operator full control over the tool.

Design
The attention to detail is not limited to just the innovative and attractive design. The modern lines and exceptional technical quality are combined with a number of details that are the result of meticulous research aimed at achieving maximum operator comfort. The non-slip rubber inserts are numerous and have many functions. In particular, the insert on the machine body is used to support the polisher when placed on a surface.

Maximum Flexibility
Thanks to the small diameter backing plate, the Rupes LHR 75E is perfect in polishing applications on small and intricate areas. The small machine dimensions and the 12 mm orbit allow comfortable handling and accuracy in detail polishing.

Electronic Speed Control Module
The speed controller is both practical and easy to use. The speed of the polisher can also be easily adjusted without interrupting the work.

The LHR75E Mini includes a 3-inch backing plate and can be used with 3", 3.5" and 4" pads.

Warranty Information and Technical Support Contact:

It is important you understand before purchasing a polisher, sander or other tool the warranty is facilitated by the the manufacturer, which is in this case is RUPES USA.

Any technical issues, warranty returns or exchanges will be facilitated directly with the manufacturer.

The Clean Garage will be happy to assist you in making contact with them and anything else within our power to make the process smooth for you should an issue arise.

We suggest reviewing the manufacturers full warranty policy before purchase which can be found here: RUPES USA WARRANTY

If your tool is out of warranty you can also follow this link and select the OUT OF WARRANTY option to learn about sending your tool to RUPES USA for repairs at a cost.