Medium-cut compound designed to easily remove medium-depth defects, haze and everyday use imperfections, including sanding marks between P2000 and P3000.

Ideal as an intermediate step after a more aggressive compound, but thanks to its refining capability it can also be used as a One Step on paintwork in good condition. Its advanced water-based formula, free from silicones or fillers, delivers a clean, uniform and haze-free finish, with smooth and controlled workability, without generating dust or leaving residue.

It applies with ease and wipes off extremely easily, optimizing working time and reducing operator effort, also thanks to its dust-free technology.

Compatible with medium foam pads for a more refined finish, or with microfiber pads for a more aggressive correction, it adapts perfectly to both rotary and dual action polishers.

1. Surface preparation

Make sure the surface is clean and properly decontaminated (thorough wash, clay bar if necessary).

Completely dry the panel before starting the polishing process.

2. Pad choice

For more aggressive correction: use a microfiber pad with a dual action polisher.

For a superior finish: use a medium foam pad with a dual action polisher.

3. Product application

Shake the bottle well.

Apply 3–4 drops of product onto the pad.

Spread the compound over the panel with the machine turned off, lightly dabbing it on.

4. Work process

Start spreading PAICAR 02 at the lowest speed.

Gradually increase the speed to activate the abrasive action,

Work in areas of approximately 40×60 cm (roughly the size of 6 pads), using cross-hatch passes (horizontal and vertical).

Apply light pressure, keeping the pad flat on the surface.

5. Result inspection

After 3–4 passes, stop the polishing cycle (approximately 2 minutes).

Remove the residue with a clean, soft microfiber towel.

Inspect the panel with an inspection light to verify the removal of defects.

6. Finishing

If necessary, proceed with PAICAR 03 to increase gloss and depth.

Protect the surface with a sealant or wax.

Pro tips

Always work in controlled environments, avoiding direct sunlight.

Clean or replace the pad regularly to avoid saturation.

Always test the product on a small area first before proceeding on the entire vehicle.

Cut: 8/10

Finish: 8/10

Color: white

Odor: light and pleasant

Physical state: creamy

Storage: 5–30°C