MTM M22 Male 15MM X 3/8" QC Coupler Hose | Stainless Steel

MTM Hydro's Stainless M22 Twist Seal Plug X QC Fittings bring the best of the European market and the demands of the U.S market into a single joint. These newly launched fittings boast the premium look and feel of stainless with the practical anticorrosion properties of AISI 304. This 15mm size is commonly found on Sunjoe, Ryobi, and Greenworks residential pressure washer hoses.<p< p="">

For the Stainless M22 Coupler (15mm) by 3/8" QC Plug to match these, see item 24.5008

When purchasing M22 fittings, the black portion is considered the Coupler. The brass exposed threads are considered the Plug (see 24.0024 for reference) and is meant to thread into the black coupler.

Terminology may vary when referencing M22s among suppliers. MTM Hydro nomenclature refers to the black twist coupler portion as "M22F" while the plugs (threads) are referred to as "M22M" followed by the sizing of the secondary end as NPT or other Variant of M22. MTM Hydro M22 manufacturing materials are offered in stainless, brass, and plated steel depending upon the item. See image for clarification

MTM Hydro M22 fittings are all 14mm stems unless notated in the item description as 15mm. If the fitting is 15mm, we will make sure you know it!

Most MTM Quick Connects are manufactured in China, depending on the batch the information stamped on them can vary. 

Warranty Information and Technical Support Contact:

It is important you understand before purchasing an MTM Hydro brand product, the warranty is facilitated by Veloci Performance Products (the supplier/manufacturer of MTM Hydro brand products), which is the case with almost all tool and equipment purchases. Veloci warrants to the original purchaser of their pressure washing accessories that such products will be free of material and workmanship defects under normal use for the period of 90 days from purchase. The entire warranty policy can be view at the link below. In the very rare case of a warranty defect or failure with a high pressure part it will typically present itself with the first use. After the 90 day period any failure of a high pressure part is considered regular wear and tear.

Any technical issues, warranty returns or exchanges will be facilitated directly with the supplier/manufacturer, Veloci Performance Products. The Clean Garage will assist you in making contact with them and anything else within our power to make the process smooth for you should an issue arise. We suggest reviewing the manufacturers full warranty policy before purchase which can be found here: https://www.vppdealers.com/refunds

For general or customer support service related inquiries, call MTM at 866-686-4020