MTM 18" Straight Pressure Washer Lance Wand | 1/4" Male Inlet and Outlet

This standard straight pressure washer lance from MTM Hydro Parts is a more affordable option and made of plated steel, available at The Clean Garage.

It features a threaded 1/4" MALE Inlet and Outlet 

Inlet Fitting:

• The Inlet would typically be threaded directly into a spray gun with a 1/4" Female Outlet ( No Quick Connects)
• If you prefer to make the inlet Quick Connect to a Spray Gun with a 1/4" Coupler you can install A 1/4" Female Plug

Outlet Fitting

• The outlet can be directly connected to a 1/4" Female Nozzle, like the MTM Turbo Nozzles we offer.
• If you prefer to make the outlet Quick Connect you can install a 1/4" Female Coupler - this will allow you to connect any rinse nozzle or foam cannon with a 1/4" plug.

Using an MTM Hydro extension lance not only increases the area you can clean, but it also keeps you a safe distance from the high-pressure stream coming out of the nozzle. All lances are 1/4" male pipe thread on both ends and may require female pipe thread fittings to install onto your pressure washer setup.

Lances do not come with fittings or teflon tape installed, be sure to order those items separately to complete your system.

• 1/4" M NPT Inlet x 1/4" M NPT Outlet
• Max - 4,100 PSI
• Max - 300°F