Labocosmetica ENERGO 250ML | Mineral Stain and Water Spot Remover

ÈNERGO removes limescale and acid rain strong contaminations from windows and bodywork, considerably shortening polishing time. Very often, limescale stains cannot be removed with normal polishing: ÈNERGO is one of the few products that can help the detailer in one of the hardest tasks, the removal of limescale traces from the paint.

Its special gel formula allows quick and easy direct application only in the areas where needed.

Thanks to its formulation features, ÈNERGO may be used as primer for nano-coating on windows to degrease and purify them. ÈNERGO has been thoroughly researched, developed and tested in #Labocosmetica® laboratories in cooperation with the most prestigious sports car manufacturers worldwide for the launch of new models.

How to use
#ENERGO it can be used in spray mode , if necessary diluting it according to the severity of the contamination with the help of an applicator pad or a soft bristle brush in order to make the most of the decontaminating action.

In the presence of strong and extensive limestone stains that have not been removed from our #PURÌFICA, apply #ÈNERGO – diluted from pure to 1: 5 – on a glove and wipe it with a wet machine , away from the sun, one panel at a time and rinsing; if, on the other hand, after carrying out this step, limescale spots remain, apply #ÈNERGO pure in small drops directly on the surface or pour it on a cotton pad placing it on the bodywork and letting it act for 5 minutes, massaging with circular movements. Then wipe with a damp microfiber.

#ÈNERGO does not damage paints and plastic parts, but in the presence of delicate, soft or single-layer paints it is recommended to proceed with caution avoiding to use the pure product to avoid the appearance of halos.

Unless pictured, Labocosmetica products do not include a spray top - they are mostly meant to be diluted in a secondary bottle.