DIY Detail 3 Year Graphene Coating 30ml | Type 3 | Ceramic Paint Coating

Type 3: 3 Year Graphene Ceramic Coating is a TEOS-based ceramic coating designed to be easy to apply while delivering enhanced gloss, slickness, and long-term protection.

The TEOS (Tetraethyl Orthosilicate) formulation helps reduce clogging and provides exceptional fracturing resistance, making this coating reliable and user friendly for both enthusiasts and professional detailers.

A foam applicator pad is included for application.

Where It Can Be Used
DIY Detail 3 Year Ceramic Graphene Coating is safe and effective on a wide range of exterior surfaces, including:

• Automotive paint
• PPF and vinyl (gloss and matte)
• Glass
• Trim and chrome
• Wheels

Key Benefits
3-year ceramic graphene protection
TEOS-based formula for improved durability and resistance to clogging
Adds noticeable gloss and slickness
Instant Bond Technology
Compatible with paint protection film and vinyl wraps

Application Instructions
Surface Prep
Start with a clean, dry, and fully decontaminated surface.
Surface temperature must be above 50°F (10°C) and remain there for at least 1 hour.
For best results, prep the surface using DIY Detail Panel Prep or C6 Ceramics Adhesion Promoter Polish (APP).

Application Method
Unscrew coating cap to expose dropper, ensuring it is seated properly.
Apply 8–10 drops to the applicator and spread over the surface.
For additional panels, apply 2–3 drops.
Allow to flash, then level with a Level One Towel & follow behind with a Freebird 400 towel.
Post-Application Care
Vehicle can return to service after 1 hour
Wash using DIY Detail Rinse Less Wash after 3 days
Full cure achieved in 7 days