AR Blue Clean AR635 HOT Pressure Washer | 3.0 GPM 1200 PSI

The Clean Garage is thrilled to be the first to offer you these exciting new units from AR Blue Clean.

This is the HOT version of the AR635 which means it has upgraded water seals to handle water up to 180 degrees. They DO NOT create hot water. Other than the water seals this unit is the same as the standard AR635 and can be used with cold water as well.

Availability: If the product page currently shows ADD TO CART this unit is in stock here ready to ship. We received a small batch of these much earlier than expected, with more coming in Spring of 2026. Once these sell out and we have a better idea of when the next batch will be in we will offer a pre-order.

Please review these important notes about these professional units before purchase:

• This unit requries at least a dedicated 20amp circuit
• You must use a 6.5 orifice rinse nozzle and 1.7mm foam cannon orifice
  • Using smaller orifices will increase the electrical draw and may damage the pump
  • AR is including a set of 6.5 nozzles with each unit. We will be stocking more options soon.
  • We offer 1.7mm foam cannon orifices from MTM. These must be purchased separetley, they are not included with any foam cannon kit.
  • Please see below for testing data with various nozzle sizes
• This unit offers HIGHER GPM and LOWER PSI tailered to car detailing. If you want more PSI this is not the machine for you.
• We purchase and sell these as "bare units" meaning it is just the pressure washer and does not include a hose or wand. We have detailed information below on the accessories you should use.
• This is the HOT version of the AR635 which means it has upgraded water seals to handle water up to 180 degrees. They DO NOT create hot water.
• Due to the weight, cost and limited availibility of these units they are not eligible for return. They are warrantied by AR North America (complete details below)

Rinse Nozzle and Foam Cannon Testing Data:

• AR is suggesting 6.5 orifice nozzles for the best balance of GPM and PSI for washing cars.
• As you can see you can go up to a 7.5 orifice nozzle to maximize GPM and lower PSI further.
• With a 6.0 or lower orifice nozzle you will be too close for comfort to a tripping a 20amp circuit.
• For your foam cannon you must use a 1.7mm orifice, these are not included with any current offerings and must be ordered separetley and swapped out.

Looking for a complete detailing package? Once these units become readily available in 2026 we will be offering our popular detailing packages. Currently we are only offering the bare pressure washer units because of the small number we received we expect them to sell out quickly. We will list all of the current data we have on these units below to help you piece your own package together and you can always email our team at sales@clean-garage.com for help.

Quick Connect and Fitting Information

Hose:

• • For an upgraded hose we suggest one of our 50' Kobrajet Hoses available in Black, Gray and Blue
  • You CAN run a longer hose but may lose some pressure and it will work the pump harder
  • We suggest ordering one of our hoses with Quick Connect Couplers on both sides combined with the plug we list below.
  • If you are going to be using a hose reel please look at our product page for that reel to see how we suggest setting it up or ideally purchase one of our reel/hose packages that are already setup properly.

INLET: AR Includes a Stainless adapter for 3/4" GHT. If you want to convert your inlet to quick connects you will need a Garden Hose QC Plug 24.5002 and Garden Hose QC Coupler 24.0631 . If you want both ends of your inlet hose to quick connect you will need 2 of each.

OUTLET: The outlet is 3/8" Male. To adapt this to a 3/8" Plug you will need part number 24.0081 This is what we suggest and will work with aftermarket hoses with a 3/8" coupler

If you already have an aftermarket hose with a 3/8" plug you will want this part 24.0063 to covert the outlet to a coupler.

HOSES AND GUNS:

• • For the hose we suggest following our guidance above, purchasing one of our Kobrajet hoses with quick connect couplers.
  • You can then purchase any of our short spray guns with a 3/8" plug installed on the inlet to connect to your hoses coupler.
  • Remember this unit is shipped without a factory hose or spray gun so you will need to purchase those separately.

Info For Mobile Detailer Setups:

• AR Tri-Plex Pumps must be gravity fed when being fed from a water tank
• The tank should be AT LEAST 12" above the pump
• The tank should be as close to the pump as possible
• The inlet hose diameter should be doubled in size when gravity feeding (1.5")
• Generator Requirements:
• To properly power a commercial pressure washer long term we suggest using the following formula when determining your generator wattage:
• AMPS X VOLTS X 3 = At least 7200 running watts

Factory Info from AR Blue Clean

The AR635 redefines expectations by delivering higher water flow without compromising the industrial elegance and precision the Blue Clean Pro line is known for. This unit produces up to 1200 PSI and an impressive 3 GPM, making it the go-to tool for professionals and enthusiasts who need fast, thorough rinsing and efficient soap removal in high-demand applications.

At the heart of the AR635 is the same forged nickel-plated brass manifold triplex pump paired with a rugged 20-amp induction motor, ensuring premium performance, quiet operation, and long-term reliability. Whether you're tackling a large-scale detailing job or washing down equipment in a commercial setting, the AR635 delivers consistent, controlled power with elegance.

Its updated design includes built-in adjustable pressure unloader for precise control, and its standout feature—our 3-position “Dual Pro” switch. Choose between Total Stop System mode to conserve energy and extend pump life, or Bypass mode for continuous trigger operation.

Backed by built-in safeguards and a 1-year limited warranty, this pressure washer is built to be more than a machine — it's a statement of serious intent.

Warranty Information and Technical Support Contact

• AR Pro Series Pressure Washers are warranted to the original purchaser for 1 year
• The pressure washer is warranted to be free from defects in material and workmanship during the specified warranty period
• Please email info@arblueclean.com or Call 1-866-235-5112 for warranty services or any technical questions regarding your AR Blue Clean pressure washer

It is important you understand before purchasing a pressure washer the warranty is facilitated by the the manufacturer, which is in this case is AR North America. Any technical issues, warranty returns or exchanges will be facilitated directly with the manufacturer. The Clean Garage will assist you in making contact with them and anything else within our power to make the process smooth for you should an issue arise. We suggest reviewing the manufacturers full warranty policy before purchase which can be found here:

AR North America Warranty