null
Categories

MTM PF22.2 Foam Cannon and SGS28 Swivel Gun Kit | New Bottle

Brand :

(2 reviews) Write a Review
MSRP: $189.99
$174.95
(You save $15.04 )
SKU:
14.7022combo3

MTM PF22.2 Foam Cannon and SGS28 Swivel Gun Kit | New Bottle

THE BEST FOAM CANNON ON THE MARKET JUST GOT BETTER! THE ALL NEW PF22.2 NOW FEATURES A STANDING ONE LITER BOTTLE! GONE ARE THE DAYS OF YOUR TOP HEAVY FOAM CANNON.

Our new kit offers you a complete solution to remove that bulky gun and wand on any pressure washer with a female M22 end, both 14mm and 15mm are included! Our SGS28 swivel gun quick connects are professionally assembled with loctite. This is a custom kit from The Clean Garage, when compared to the Magnum 28 kit from MTM this kit features an already assembled gun and the needed quick connects for your hose. We also have the standard kit available here: MTM Magnum 28 Foam Cannon Kit - NEW PF22.2 and SGS28 Swivel Gun

Contents of the Kit:

  • SGS28 Swivel Gun with Quick Connects Installed
  • M22 Hose Quick Connect Adapter in 14mm and 15mm (you will use only one)
  • Italian Nickel Plated Brass -Single Cast Foam Cannon body
  • Italian Calibrated 32 oz New Stand up Grey Bottle
  • 1/4" x 9" tube for drawing chemical
  • 3.5 Orifice (1.25mm) installed in the Foamer Body
  • 3.0 Orifice (1.1mm) included with kit
  • Fitting pack (2-peices) containing a 1/4" M22 adaptor and 1/4" QC Plated Steel Plug
  • Manual with care instructions and exploded view

MTM Hydro's Italian Manufactured PF22.2 Foam Cannon is the new standard in the foaming industry and stands alone as the most reliable foam Cannon in the industry. With its new standing bottle you no longer have to worry about spills and tipping over. Whether you are foaming down your car on the weekend or you are a professional contract cleaner foaming hog barn for hours, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical in the calibrated standing bottle and you are up and running.

The MTM Hydro PF22 launched in 2017 as the latest and greatest foam cannon to hit the world stage. The PF22 offers both, adjustable fan blades, and a two stage nozzle allowing you to spray vertically and horizontally. By adjusting the fan blades (narrow or jet) MTM Hydro Foam cannons throw thick foam onto your vehicle, pole barn siding, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top of the PF22 also clicks and allows for precise measurement of more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam that is stickier than the Chinese knock-off foam cannons. In doing so, this thick foam has a longer dwell time which allows the chemical to work on the cleaning surface for longer in its effort to emulsify the dirt and grime. some surfaces may still require some elbow grease, however, if the chemical does its job, very little (if any) scrubbing is required.

NOTE A specific 1/4" Male plug(LINK BELOW) may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean,etc... have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow. We now offer this new Low Profile QC plug under item #24.5006. Once you install the correct plug in your new MTM Foam Cannon, you sill see that it was worth finding this specialized fitting as our foam cannons are second to none, even when manufactures try to change their fittings!

MTM Short Profile Stainless Quick Connect Plug 1/4" Ryobi Greenworks

Specs:
Min. 1,100 psi - Max. 5,000 psi
Min. 1.4 gpm - Max. 5.3 gpm
Max. 140°F

  • 5
    High quality!

    Posted by Kevin Jewell on Sep 12th 2020

    Both the gun and foam cannon are very high quality. The cannon actually comes with a screw on cap for the bottle, wish I could've known because I would've bought another bottle. I can already tell these products will last for many years!

  • 5
    Great Product

    Posted by Tyler Gravatt on May 29th 2020

    I have used various foam cannons for years, including the previous model that MTM created. This foam cannon paired with the stubby handle is another great addition to my detailing arsenal. Item was put to the test minutes after unboxing and will be used regularly. Would purchase this product again.

Customers Also Viewed