MTM 18" Straight Pressure Washer Lance Wand | 1/4" Male Inlet and Outlet

This standard straight pressure washer lance from MTM Hydro Parts is a more affordable option and made of plated steel, available at The Clean Garage.

It features a threaded 1/4" MALE Inlet and Outlet 

Inlet Fitting:

• The Inlet would typically be threaded directly into a spray gun with a 1/4" Female Outlet ( No Quick Connects)
• If you prefer to make the inlet Quick Connect to a Spray Gun with a 1/4" Coupler you can install A 1/4" Female Plug

Outlet Fitting

• The outlet can be directly connected to a 1/4" Female Nozzle, like the MTM Turbo Nozzles we offer.
• If you prefer to make the outlet Quick Connect you can install a 1/4" Female Coupler - this will allow you to connect any rinse nozzle or foam cannon with a 1/4" plug.

Using an MTM Hydro extension lance not only increases the area you can clean, but it also keeps you a safe distance from the high-pressure stream coming out of the nozzle. All lances are 1/4" male pipe thread on both ends and may require female pipe thread fittings to install onto your pressure washer setup.

Lances do not come with fittings or teflon tape installed, be sure to order those items separately to complete your system.

• 1/4" M NPT Inlet x 1/4" M NPT Outlet
• Max - 4,100 PSI
• Max - 300°F

Warranty Information and Technical Support Contact:

It is important you understand before purchasing an MTM Hydro brand product, the warranty is facilitated by Veloci Performance Products (the supplier/manufacturer of MTM Hydro brand products), which is the case with almost all tool and equipment purchases. Veloci warrants to the original purchaser of their pressure washing accessories that such products will be free of material and workmanship defects under normal use for the period of 90 days from purchase. The entire warranty policy can be view at the link below. In the very rare case of a warranty defect or failure with a high pressure part it will typically present itself with the first use. After the 90 day period any failure of a high pressure part is considered regular wear and tear.

Any technical issues, warranty returns or exchanges will be facilitated directly with the supplier/manufacturer, Veloci Performance Products. The Clean Garage will assist you in making contact with them and anything else within our power to make the process smooth for you should an issue arise. We suggest reviewing the manufacturers full warranty policy before purchase which can be found here: https://www.vppdealers.com/refunds

For general or customer support service related inquiries, call MTM at 866-686-4020