KobraJet Smooth Blue Jumper Hose 5' | Pressure Washer Whip Line | The Clean Garage

MTM Hydro's KobraJet Smooth Blue Whip Lines are available in various lengths to accommodate all cleaning scenarios. Kobrajet Whip Lines are manufactured out of high quality components and assembled in the U.S using 'Bite the Wire' technology when installing the 3/8" rigid and swivel fittings. This technique guarantees that your hose ends will stay in place and will not rupture or blow off during pressure spikes.

Whip Lines are used in many areas but are primarily found as a Jumper Line between the Pump and the Unloader when the unloader is mounted to the pressure washer's frame.

A secondary location is when contract cleaning companies use long lengths of hose (100'-200') they will attach a 2' to 6' whip line to the outlet where the gun is attached. The last section of hose is the most susceptible to stress and bursting, regardless of the quality so with a small section at the end, if something does happen, only a Whip Line needs to be replaced instead of an expensive 150' hose.

Kobrajet hose can handle temp spikes up to 310F but constant run temperatures should not exceed 275F.

3/8" Male NPT Rigid End X 3/8" Male NPT Swivel End.

We offer 3 options for each hose which you can select above:

1) No quick connects: the hose will have 3/8" male threaded ends on both sides.

2) With a stainless 3/8 coupler on ONE end. The other end with have a 3/8" male threaded end.

3) With stainless 3/8" couplers installed on both ends.

The couplers used are part number 24.0063 from MTM.

If you are using this jumper hose with one of our hose reels, please review the product page for the hose reel for our advice on what fittings you will need for that specific reel. 

Warranty Information and Technical Support Contact:

It is important you understand before purchasing an MTM Hydro brand product, the warranty is facilitated by Veloci Performance Products (the supplier/manufacturer of MTM Hydro brand products), which is the case with almost all tool and equipment purchases. Veloci warrants to the original purchaser of their pressure washing accessories that such products will be free of material and workmanship defects under normal use for the period of 90 days from purchase. The entire warranty policy can be view at the link below. In the very rare case of a warranty defect or failure with a high pressure part it will typically present itself with the first use. After the 90 day period any failure of a high pressure part is considered regular wear and tear.

Any technical issues, warranty returns or exchanges will be facilitated directly with the supplier/manufacturer, Veloci Performance Products. The Clean Garage will assist you in making contact with them and anything else within our power to make the process smooth for you should an issue arise. We suggest reviewing the manufacturers full warranty policy before purchase which can be found here: https://www.vppdealers.com/refunds

For general or customer support service related inquiries, call MTM at 866-686-4020