Diamond ProTech Diamond Body Coating Kit 50ml | Paint Coating Kit

The Diamond Body Complete Kit Includes:

• Diamond Body 50ml -- Enough for one large SUV or two normal sized sedans
• Diamond Body Prep 100ml
• Applicator Pad to wipe product onto your vehicle
• Microfiber Towels to wipe product off of your vehicle
• Protective Gloves -- In two sizes, L & XL

The 1st Zero Cure Time Coating In A Ready To Go Complete Kit

• Single-Layer Application
• Extended Flash Time
• ZERO Cure Time
• Signature Shine & Gloss
• Hyper Flexibility
• Extreme Hardness
• Stain Resistance
• UV & Chemical Resistance
• Intense Hydrophobicity
• Ideal for mobile detailing
• 18+ Months Of Protection

This coating's patented nanodiamond technology enables it to surpass ceramic coating technology by possessing more of all the same great characteristics, while bypassing a required cure time before exposing it to the elements, and being significantly more user-friendly.

This kit also comes with Diamond Body Prep which is a next generation formulation that uses a proprietary blend, vastly different than your standard IPA wipe. This 3-in-1 formula conveniently cleans, preps, and primes the surface all in 1 easy step.

Some additional tips before applying your coating

• For use on all body panels, plastic trim, headlights, and chrome accents
• Do NOT use on glass -- Both Diamond Body & Diamond Body Prep
• Use separate microfiber towels for wiping off Diamond Body Prep & Diamond Body
• Polishing is not required before application, but is strongly recommended
• If you experience a high spot while coating, re-apply Diamond Body to the affected surface & immediately wipe off.

Installation Instructions

1. Ensure all vehicle elements are wiped down with Diamond BODY PREP
2. Shake Diamond Body well for 15 seconds or longer. Place 15-20 drops to an applicator to prime it.
3. Apply the coating to 1-2 elements of the car in a crosshatch fashion. Re-apply additional drops of product to the applicator as needed.
4. Wait 3-5 minutes, then wipe off the excess coating. Try to look for lines and droplets indicating the coating is ready for wipe-off. (Wipe-off time varies with temperature, humidity, and film type.)