Diamond ProTech Diamond Body Coating 50ml | Paint Coating

This part number includes 50ml coating bottle only. We also stock a kit with a 50ml bottle and accessories. 

The 1st Zero Cure Time Coating 

• Single-Layer Application
• Extended Flash Time
• ZERO Cure Time
• Signature Shine & Gloss
• Hyper Flexibility
• Extreme Hardness
• Stain Resistance
• UV & Chemical Resistance
• Intense Hydrophobicity
• Ideal for mobile detailing
• 18+ Months Of Protection

Derived from Aerospace technology, Diamond Body is an industry-first, ZERO cure time coating.

This coating's patented nanodiamond technology enables it to surpass ceramic coating technology by possessing more of all the same great characteristics, while bypassing a required cure time before exposing it to the elements, and being significantly more user-friendly.

This coating truly is the ideal choice if you truly want to protect your investment, and does not require any professional training or prior coating experience to achieve flawless results.

Some additional tips before applying your coating

• For use on all body panels, plastic trim, headlights, and chrome accents
• Do NOT use on glass -- Both Diamond Body & Diamond Body Prep
• Use separate microfiber towels for wiping off Diamond Body Prep & Diamond Body
• Polishing is not required before application, but is strongly recommended
• If you experience a high spot while coating, re-apply Diamond Body to the affected surface & immediately wipe off.

Installation Instructions

1. Ensure all vehicle elements are wiped down with Diamond BODY PREP
2. Shake Diamond Body well for 15 seconds or longer. Place 15-20 drops to an applicator to prime it.
3. Apply the coating to 1-2 elements of the car in a crosshatch fashion. Re-apply additional drops of product to the applicator as needed.
4. Wait 3-5 minutes, then wipe off the excess coating. Try to look for lines and droplets indicating the coating is ready for wipe-off. (Wipe-off time varies with temperature, humidity, and film type.)