CarPro DQUARTZ GForce Glass Coating 10ml | Kit With Eraser

High clarity and super-durable long lasting hydrophobic glass coating in a single easy to use coating!
With the advent of DQUARTZ, automotive coatings changed forever and now CARPRO has brought their technological revolution to your windshield and glass surfaces as well! The all-new DQUARTZ GForce coating for glass is the revolutionary new nano diamond technology, built from the ground up to bond directly to glass which provides superior protection and crystal-clear vision for up to 2 years!

Enhanced Water Repellency and Adhesion to Glass:

We have redesigned hydrophobic and adhesion tech to ensure a strong bond with your windows, allowing water droplets to effortlessly glide off the glass, delivering outstanding hydrophobic effects even at speeds below 30mph.

Revolutionary Nano diamond Technology:

GForce incorporates the latest DQ technology with synthetic nano diamond particles, providing unprecedented scratch resistance. This coating not only restores the luster of your windows but also helps protect them from scratches and dirt, ensuring your windows stay spotless.

Protection Year-Round:

Whether it's a hot and humid or rainy summer, a freezing winter, or anything in between, this resilient coating offers long-lasting protection for your windows all year round. DQUARTZ GForce not only keeps your glass clean but also greatly enhances driver and passenger safety with unparalleled confidence and clarity of vision, whatever the conditions.

Features:
Lasts 12~24 months or over 13,000 wiper cycles.
Extremely easy to apply.
Extreme beads & water repellency.
DQUARTZ functional synthetic nano-diamond technology.
Extreme durability.
Excellent clarity.
Beads water off at speeds as low as 30mph.

Contents:

(1) 10ml DQUARTZ GForce

(1) 50ml CarPro Eraser
(1) Terry Weave Towel
(5) Cotton Round pads
(2) DQUARTZ Sticker
(1) User Manual from CARPRO (We advise using our directions shown below)

Directions:

1. Wash, clay/decon, and mechanically polish the glass using CARPRO Ultracut. You may do this by hand with a microfiber towel or if you have a machine, use Foam Polishing Pad.
2. Panel wipe the glass with CARPRO Eraser or isopropyl alcohol and a clean unused glass Towel.
3. Shake GForce and then apply a line of product across applicator. We recommend using the included CQUARTZ Applicator wrapped with 4" Suede.
4. Wipe onto a 2 Sq. Ft. section in straight lines and then overlap in a perpendicular overlapping pattern. Apply as evenly as possible. Add more product to applicator if necessary to avoid grabbing.
5. Move to next section and repeat steps 3 & 4.
6. After allowing to flash for a few minutes, move back to your first section and wipe off any high spots using a clean 2-Face Towel. (Inspect from all angles in good ambient lighting).
7. Repeat step 6 across each section which you applied to in the order it was applied.
8. If you wish to apply a second layer wait 30~45 minutes from start of first coat to begin second coat.
9. Inspect immediately from multiple angles and from inside and outside vehicle.
10. If you find haze, you may re-wet the area with additional GForce to remove it.
11. Keep the surface dry for 4 hours.
12. For best results, do not use wipers for 24 hours minimum. - NOTE: Do not place yourself in a situation that is unsafe for use without wipers.