Active 2.3 Pressure Washer | Premium Wall Mount Detailing Package | The Clean Garage
The second version of the Active 2.3 is now available!
Please make sure you review the updates to this unit before purchase. The 2.3 is now sold as a "bare unit" with no hose or wand, the previous "outer cage" has also been removed and replaced with top handle.
Availability: If the product page currently shows ADD TO CART this unit is in stock here ready to ship. If it says PRE-ORDER we are out of stock on this unit and are showing the best estimate we currently have for when a new order placed today would ship to you.
The Clean Garage offers a complete range of custom detailing packages for the Active 2.3 Pressure Washer. Our packages come in different "levels" with a clear listing of what parts are included.
Check out all of our Active 2.3 Packages Here
Our Wall Mount kit includes the following:
- ACTIVE 2.3 1100 PSI 2.3 GPM PRESSURE WASHER (SE-12)
- MTM 14MM to 3/8" Quick Connect Plug For Pump Outlet
- COX Custom Hose Reel: Choose from Blue or Black above
- Kobrajet Blue Smooth Jacket hose: Choose from 50' 75' or 100' above
- This hose comes setup with a MTM SS 3/8" quick connect coupler (24.0063) on the outlet for your spray gun and male 3/8" connection on the inlet to connect to your COX Reel
- Kobrajet Blue Smooth Jacket 3' Jumper Hose (29.5219)
- This hose comes setup with a MTM SS 3/8" quick connect coupler (24.0063) on the inlet to connect to the plug on your pump and male 3/8" connection on the outlet to connect to your COX Reel
- Mosmatic Swiveling Spray Gun (29.132) with MTM SS quick connects installed (24.0062 and 24.0082)
- MTM Acqualine Rinse Nozzle with Guard - 4.5 orifice 40 degree (16.7025)
- Active Premium Foam Cannon (JH60)
- 2x MTM Garden Hose Quick Connect Couplers
- 2x MTM Garden Hose Quick Connect Plugs
Optional Add-Ons Available Above:
- These items are optional as not everyone needs them, if you do not select one you will not be charged for it. If you decide you need one after purchase you will need to place a new order paying for the item plus shipping if applicable.
- Option 1: Wall Mount Shelf - Choose between Our Stainless Shelf which is 20" and mounts to standard 16" studs or our Black Poka Premium shelf which is 18" with mounting brackets that are 14" apart.
- Option 2: Reel Mount - Add Our Stainless Steel mounting plate for your Cox Reel which alos mounts to standard 16"studs. Currently only available in Stainless.
- Option 3: Add a 20" Bent extension wand- these quick connect to your spray gun and offer an extension for your rinse nozzle or foam cannon. We offer a few options but suggest the Mosmatic one to match your spray gun.
- Option 4: Add an Inlet(Garden) Hose - We off 5 custom lengths, you will need to measure for your specific setup and make sure you leave some room for slack as you do not want the hose too tight.
Foam Cannon
- We suggest installing the included 1.45 orifice that is included from Active in your foam cannon to reduce electrical draw.
The Active 2.3 is an extension of our research in product development of the Active 2.0 and is built for the professional consumer. Continuous product testing and seeking means to improve our product offering through consumer feedback gave us the big breakthrough in developing a cohesive solution that the market needs, in terms of both the product design and performance.
The 2.3 comes equipped with an updated brass endplate 5-Piston Pro Pump and a 128 Induction motor, which gives you 2.3 GPM at 1100 PSI. The combined operating output of 2,500 cleaning units will make any cleaning task a breeze. Seriously this machine packs a punch!
Active includes these 2 accessories with the unit to make sure you have the proper amp draw:
- 1.45mm nozzle for after market foam cannons to maintain current draw under 15A.
- 4 rinse nozzles (0,15,25,40)(4.5 orifice size).
Piecing your own detailing package together? Here is what The Clean Garage Suggests:
- Rinse Nozzles:
- Optimal Choice: 4.5 Orifice
- Active includes a set of 4.5 orifice nozzles with the unit, if you are buying aftermarket nozzles a 4.5 is the best option
- For Slightly Lower PSI: 5.0 Orifice
- Foam Cannon:
- Hose:
- For an upgraded hose we suggest one of our 50' or 75' Kobrajet Hoses available in Black, Gray and Blue
- You CAN run a 100' hose but may lose some pressure and it will work the pump harder
- We suggest ordering one of our hoses with Quick Connect Couplers on both sides combined with the pump outlet adapter with plug listed below.
- Quick Connects and Fitting Sizes:
- If you want to convert your inlet to quick connects you will need a Garden Hose QC Plug 24.5002 and Garden Hose QC Coupler 24.0631 . If you want both ends of your inlet hose to quick connect you will need 2 of each.
- Pump Inlet: The unit comes with a standard 3/4" GHT Female adapter installed, so a standard garden hose will connect to it without any other parts needed.
- Pump Outlet: This unit has the most common size pump outlet M22 14MM Male
- To adapt this to a 3/8" Plug you will need part number 24.5014 (For aftermarket hoses with a 3/8" coupler)
- To adapt this to a 3/8" Coupler you will need part number 24.0448 (For aftermarket hoses with a 3/8" plug)
Factory Product Specifications
- Load Voltage: 120V/60 Hz
- Rated Current: 14A
- Power Cord: 35 ft. 14 AWG with GFCI
- Peak Pressure: 1500 PSI
- Working Pressure: 1100 PSI
- Water Flow: 2.3 GPM
- Motor: 128 Induction
- Pump: Patented 5 Piston Reinforced Brass
- Hose: NOT INCLUDED
- Soap Application: 750ml Foam Blaster
- Gun and Wand Assembly: NOT INCLUDED
- Switch: Rocker Switch
Electric Requirements:
The Active 2.3 is designed to run on a 15A circuit rated at 120V/60Hz. We discourage the use of extension cords, but if one must be used, we recommend using an extension cord not longer than 50’ and it must be rated for 14 AWG. When using foam cannons, we'll be providing a 1.45mm nozzle with the 2.3 so users can work with their after market foam cannons while maintaining current draw under 15A.
Info For Mobile Detailer Setups:
- Industry standard states your pump must be gravity fed when being fed from a water tank
- The tank should be AT LEAST 12" above the pump
- The tank should be as close to the pump as possible
- The inlet hose diameter should be doubled in size when gravity feeding (1.5")
- These are just guidelines to help you with your custom setup. You will need to make sure you have the minimum required inlet pressure and flow which is 40 PSI and 4.8 GPM to ensure the washer operates as intended.
- Generator Requirements:
- To properly power a commercial pressure washer long term we suggest using the following formula when determining your generator wattage:
- AMPS X VOLTS X 3 - So for this unit using the suggested accessories above you need AT LEAST 5040 RUNNING watts
Warranty Information
It is important you understand before purchasing a pressure washer the warranty is facilitated by the the manufacturer, which is in this case is Active Products. Any technical issues, warranty returns or exchanges will be facilitated directly with the manufacturer. The Clean Garage will assist you in making contact with them and anything else within our power to make the process smooth for you should an issue arise. We suggest reviewing the manufacturers full warranty policy before purchase which can be found in the manual below.
This pressure washer comes with a 2-year residential warranty and 1-year commercial warranty (read product manual for more details) This product requires registration prior to warranty support on our product registration portal. Ensure you have your purchase proof, purchase store, order ID and serial number for registration. Register Online
What if my pressure washer is not working as intended?
The first step to follow is to read your product manual for troubleshooting. We will soon be providing videos on product maintenance, upkeep and troubleshooting so this will be an additional resource as a troubleshooting guide. If product troubleshooting does fail, please ensure you email us at support@activeproducts.com for agent support. Make sure to register your product prior to contacting us.
Active 2.3 Product Manual Link
