100' Kobrajet Pressure Washer Hose Gray | 100 Foot | Add Quick Connects

These are by far the best high pressure hoses we have ever tested. They do not kink and allow you to move easily around your vehicle while washing it!

We offer 3 options for each hose which you can select above:

1) No quick connects: the hose will have 3/8" male threaded ends on both sides.

2) With a stainless 3/8 coupler on ONE end. The other end with have a 3/8" male threaded end. (common setup for hose most 3/8" hose reels)

3) With stainless 3/8" couplers installed on both ends.

The couplers used are part number 24.0063 from MTM.

This non-marking hose now features a thicker inner wall to prevent gashes and ruptures and is great for any pressure washing application. Kobrajet is manufactured out of high quality components and assembled in the U.S using 'Bite the Wire' technology when installing the 3/8" rigid and swivel fittings. This technique guarantees that your hose ends will stay in place and will not rupture or blow off during pressure spikes. These advanced fittings also have a longer life with superior resistance to corrosion due to the salt spray test which yielded results of 125 hours before corrosion was detected; nearly twice the industry standard, meaning your hose will last longer, especially in abusive environments.

Kobrajet hose can handle temp spikes up to 310°F but constant run temperatures should not exceed 275°F

Specifications

• 4,000 PSI Max Pressure
• 275º F Max Temperature
• 3/8" Inside Diameter
• 5/8" Outside Diameter
• 3/8" Male NPT Swiveling Inlet
• 3/8" Male NPT Fixed Outlet
• Non-Marking Gray
• Rubber Bend Restrictors