Chemical Guys VSS Scratch & Swirl Remover 16oz | One Step Polish
Why Buy This Product?
- 1-step high gloss polish
- Produces exceptional shine in 1 step
- Removes scratches, swirls, water spots, and other imperfections
- Great for all clear coat or single stage paint
- Works on all colors
- Contains no fillers or waxes
- Works on any DA/rotary buffing machine
Chemical Guys VSS Scratch & Swirl Remover is the easy-to-use polish that creates a mirror finish in just one step. VSS cuts strong to quickly remove swirls, scratches, and defects. The advanced one-step polish finishes like a fine polish to restore lustrous shine and deep reflection. Use VSS to remove swirls and scratches from single stage, clear coat, and even ceramic finishes on any car, truck, motorcycle, or RV. Chemical Guys VSS is formulated for fast work time using any dual-action or rotary polishing machine. VSS is water-based, body shop safe, and OEM approved, which means it will deliver great results in a fraction the time of standard 2 or 3 step polishes. For the fastest one-step scratch and swirl removal use Chemical Guys VSS Scratch & Swirl Remover!
How To Use:
Hand Application:
1. Work on cool surface.
2. Shake Well.
3. Always work 2’ x 2’ section at a time.
4. Using a polishing pad, work the VSS Scratch & Swirl Remover into the paintwork to remove swirls, scratches, and oxidation.
5. Remove excess residue using a premium microfiber towel to achieve a brilliant shine.
6. Follow by applying a coat of your favorite Chemical Guys wax or sealant.
DA Application:
1. Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Pad Conditioner.
2. Set DA machine to speed setting 5-6.
3. Always work 2’ x 2’ section at a time.
4. Using moderate pressure, work area in 2-3 passes until polish becomes clear.
5. Follow with light pressure to finish. Remove residue with a clean microfiber towel.
6. Follow by applying a coat of your favorite Chemical Guys wax or sealant.
Rotary Application:
1. Apply 4-5 drops to desired pad.
2. Prime pad with Chemical Guys Pad Conditioner.
3. Set machine 1000-1500 RPMs to spread product.
4. Always work 2’ x 2’ section at a time. Using just the weight of the machine (no pressure) work area in 3-4 passes until polish becomes clear. For final pass adjust speed setting to between 1200-1800 RPMs. Work until optical clarity has been achieved.
5. Remove residue with a clean microfiber towel.
6. Follow by applying a coat of your favorite Chemical Guys wax or sealant.
