AR BC Pro 675 Pressure Washer | TSS Total Stop | 2000 PSI 1.7 GPM AR675
We are thrilled to bring you our latest industrial pressure washer offering, currently available exclusively at The Clean Garage.
We worked closely with our friends from AR North America to develop this unit for our customers and test it with our detailing accessories, here is why we love it:
- 15 Amp Electrical Requirement - The AR630TSS is one of our top sellers, but the 20 amp electrical requirement does not work for everyone. The Clean Garage and AR North America have both tested this unit with our suggested detailing accessories and the draw was 11.85 AMPS and 121.7 Volts. Scroll down for more info on our testing.
- Easily Adaptable to Detailing Accessories - The simple design of the inlet and outlet and common thread sizes make this unit easily adaptable to our MTM Hydro, Mosmatic and other aftermarket detailing accessories. Scroll down for more info on fitting sizes.
- Can be Mounted to a Shelf or Cart- This unit fits perfectly on our Stainless Beadz Shelf for a wall mount setup or to a cart for a mobile setup. AR North America offers a folding cart AR600S-TK.
- Great balance of GPM and PSI- Tested with a 3.5 orifice rinse nozzle the results were a consistent 1.6 GPM and 900 PSI, which in our opinion is perfect for car detailing.
Factory Information on The AR675 Model:
- PSI Max 2000
- GPM Max 1.7
- Total Stop System
- 15 AMP - 60 Hz - 120v
- 49 Pounds
- Professional Trigger Gun and Metal Lance with Adjustable Nozzle Included
- 25' High Quality Steel Armed HP Hose Included
- PLEASE NOTE WE CAN NOT CURRENTLY GET THIS UNIT WITHOUT HOSE/GUN/WAND LIKE WE DO WITH THE 630
- 20' Power Cord with GFCI
- Garden Hose Adapter Built In
- Triplex Pump with Ceramic Pistons and Connecting Rod System
- Automatic Bypass Valve with Pump Head Pressure Discharge
- Single Phase Induction Motor with Thermal Protection
- Pressure Adjustment (Knob on top)
Looking for a complete detail package? Check out all of our AR675 kits here: AR675 TSS
Piecing your own detailing package together? Here is what The Clean Garage and AR North America Suggest:
- Rinse Nozzles:
- Optimal Choice: 3.5 orifice (our testing resulted in 1.61 GPM, 1000psi and 11.21 AMP draw)
- For Higher PSI: 3.0 orifice (our testing resulted in 1.55 GPM, 1100psi and 12.52 AMP draw)
- Foam Cannon:
- 1.25mm orifice should be used (our testing resulted in 1.6 GPM, 950psi and 11.85 AMP draw)
- Hose:
- Our testing was done with a 3/8" diameter 50' Kobrajet Hose. We have these available in Black, Gray and Blue and suggest purchasing with couplers on both ends paired with the pump outlet connector below.
- AR North America does not suggest using a hose longer than 50'. While it can be easily done you risk pressure loss and added stress on your pump.
- If you are going to be using a hose reel please look at our product page for that reel to see how we suggest setting it up. Please also consider our complete wall mount packages to make things easier and make sure you get everything you need.
- Quick Connects and Fitting Sizes:
- Pump Inlet: The unit comes with a standard 3/4" GHT Female adapter installed, so a standard garden hose will connect to it without any other parts needed.
- If you want to convert your inlet to quick connects you will need a Garden Hose QC Plug 24.5002 and Garden Hose QC Coupler 24.0631 . If you want both ends of your inlet hose to quick connect you will need 2 of each.
- Pump Outlet: This unit has the most common size pump outlet M22 14MM Male
- To adapt this to a 3/8" Plug you will need part number 24.5014 (For aftermarket hoses with a 3/8" coupler)
- To adapt this to a 3/8" Coupler you will need part number 24.0448 (For aftermarket hoses with a 3/8" plug)
- AR Factory Hose and Spray Gun:
- The included AR hose is M22 14mm Female on both ends, To convert this to a 3/8" Quick Connect Coupler use part number 24.5021
- The included AR Spray Gun is M22 14mm Male. To convert this to a 3/8" Quick Connect Coupler use part number 24.5014
Info For Mobile Detailer Setups:
- AR Tri-Plex Pumps must be gravity fed when being fed from a water tank
- The tank should be AT LEAST 12" above the pump
- The tank should be as close to the pump as possible
- The inlet hose diameter should be doubled in size when gravity feeding (1.5")
- Generator Requirements:
- To properly power a commercial pressure washer long term we suggest using the following formula when determining your generator wattage:
- AMPS X VOLTS X 3
- That means when using this unit with our suggest detailing supplies you would want at minimum a 4500 running watt generator
Looking for a different AR Unit? We can get them all send us an email sales@clean-garage.com
Warranty Information and Technical Support Contact
- AR Blue Clean Pressure Washers are warranted to the original purchaser for 1 year
- The pressure washer is warranted to be free from defects in material and workmanship during the specified warranty period
- Please call 1-866-235-5112 for warranty services or any technical questions regarding your AR Blue Clean pressure washer
It is important you understand before purchasing a pressure washer the warranty is facilitated by the the manufacturer, which is in this case is AR North America. Any technical issues, warranty returns or exchanges will be facilitated directly with the manufacturer. The Clean Garage will assist you in making contact with them and anything else within our power to make the process smooth for you should an issue arise. We suggest reviewing the manufacturers full warranty policy before purchase which can be found here:
AR North America Warranty
